The Types Of Pulping Equipment

The function of the pulping equipment is to make the pulp have good softness, plasticity, and reasonable size after pulping treatment, and greatly improve the chance and strength of hydrogen bonding between fine fibers.

According to the structural principle of the beating equipment, it is mainly classified as follows:

      1. According to whether it is continuous or not: 1. Intermittent pulping machine: such as Dutch style pulping machine, Volt style pulping machine. 2. Continuous pulping machines: such as cylindrical pulping machines, conical pulping machines, and disc mills.

      2. Divided by rotor structure: 1. Drum type: pulping machine, cylindrical pulping machine. 2. Cone type: ① Divided into large cone cone grinding machines according to the size of the taper, with a taper of 60 ° -70 °; Medium taper cone mill, with a taper of 20 ° -30 °; Small cone cone mill, with a cone angle of about 10 ° According to the number of conical grinding chambers, it is divided into single chamber conical pulping machines and double chamber conical pulping machines According to the support method of the shaft, it is currently divided into through shaft cone pulping machine and cantilever cone pulping machine. 3. Disc type: ① Divided into single action disc type grinder and double action disc type grinder according to the number of rotating discs; ② According to the total number of discs, it is divided into double disc pulping machines, three disc pulping machines, and multi disc pulping machines.

      3. According to the beating concentration: 1. Low concentration beating machine (2% -6%): various types of beating machines. 2. Medium concentration pulping machine (8% -20%): single disc high concentration pulping machine, cylindrical high concentration pulping machine. 3. High concentration pulping machine (20% -35%): single disc high concentration pulping machine, cylindrical high concentration pulping machine.