Working principle of pulp machine
impulse of pressure difference and revolving cutter . Then in the effect of hydraulic shear force , friction
of fibers and the beating of blades, the pulp is defibered.
The pressure difference between sieve plates impulse of cutters make. The defibered go through the
screen holes on sieve plates and go out from accept outlet. The pulp wich can not go through sieve plates
revolve rapidly in the cabinet and generate strong centrifugal force , which together with the difference of
proportion make the heavy impurities, fiber and light impurities radially stratified. Heavy impurity, fiber and
ligh impurities at the same time move the section far away from sieve plates with the push cutter blades .
Heavy impurities move along the inside wall of cabinet to tangent outlet and go into heavy impurity cleaner.
After the cleaning of heavy of heavy impurity , pulp will go out from cleaner regularly and get into fiber
separator again from pulp inlet. Light impurities have small proportion, they are concentrated in the central
part and go out continuously from central outlet. When pulp move to end cover, it will flow back to cutter and
go through sieve plates again.
Technical parameters
Type | HDF-2 | HDF-3 | HDF-4 | HDF-5 | HDF-6 |
Consistency of inflow pulp (%) | 2-4 | ||||
Production capacity (t/d) | 50-70 | 80-100 | 120-180 | 160-280 | 240-360 |
Hole size (mm) | Conical hole, diameter 3/4/5/6/7 | ||||
Power of motor (Kw) | 37 | 55 | 75 | 132 | 185 |
Shipping
We provide the production line