Paper Pulp Hydrapulper for Waste Paper
Product Details
The paper pulp hydrapulper for waste paper used to crushing pulp board, wastepaper, deinking, and pulp purification.
The features of this machine are promptly crushing wastepaper, deinking on the condition of high concentration, the capacity of this machine is large, and the consumption of power is low. At the same time, saving vapour medication. Besides, it is easy to maintain, the service life is long, the noise of machine is low, the vibration is not strong, stable operation, and saving 50% water and energy.
The process of hydrapulping serves to separate the paper fibers from one another, which is important for downstream processing steps such as screening, cleaning, and refining. The resulting pulp can be used to make a variety of paper products, including writing paper, tissue paper, and cardboard. The consistency and quality of the pulp produced by the hydrapulper are critical factors in the quality of the finished product.
Modern paper pulp hydrapulpers are typically equipped with advanced controls and sensors to monitor the process and optimize operating conditions. They may also feature energy-efficient designs to reduce power consumption and environmental impact. Overall, the paper pulp hydrapulper is an essential component of the papermaking industry, helping to transform waste paper into new products while minimizing environmental impact.
Working Principle
When the electric motor start up,the impeller began to turn the slurry of vat body will be suck in along the axis center . Throw from the circumference with high speed and form severe turbulence loops .
As the impeller tear at and different speed of slurry layer working together,it produce a huge rubbing effect and make the slurry defibering strongly, separation of fiber .At the same time, the fiber bundles in the gap between impeller and screen plate rubbing to improve the fibrosis effect.
It can shorten the pulping time, reduce energy consumption and increase the specific capapcity per unit of volume.
Product Show
Parameters
| Model | AT-200 | AT-225 |
| Diameter(m) | 200 | 2.25 |
| Length(m) | 10 | 12.3 |
| Capacity(t/d) | 30-50 | 50-80 |
| Power(kw) | 55 | 75 |
| Working Concentration(%) | 14-18 | |
| Output Pulp Concentration(%) | 3-4 | |
| Opreating Temprature(℃) | 40-90 | |
| Emptyweight(t) | 14.1 | 16.2 |
| Unit weight(t) | 20.1 | 28.9 |
Packing&Shipping
By the same token, some countries have marine transportation business, then we use the most economical and safe marine transportation. However, there are no ports near some countries, so you can use adjacent ports or rail transportation, which will save some costs.
